Tag Archives: P100

DIY Bakkie – Ford P100

In 1971 Ford in South Africa built a version of the 2 door Ford Cortina Mk III with a pick up body on the back marketed as the Ford Cortina Pickup and known locally as the “Bakkie”.

The Bakkie utilised a modified Cortina floor pan with a ladder frame to carry the rear load carrying body and initially used Rover 5 stud hubs, post 1988 examples were fitted with Ford Granada front axles with 5 stud adaptors and 5 stud Ford Transit rear axles.

Ford P100, Classic Motor Show, NEC, Birmingham,

In 1977 the Bakkie was up graded with an adapted Cortina Mk IV body which used the shorter doors from the 4 door body and from 1980 adapted Cortina Mk V bodies were used.

Ford P100, Classic Motor Show, NEC, Birmingham,

From 1982 the Bakkie was rebranded as the P100 model and exported from South Africa to Europe and remained in production with the Cortina Mk V body until 1988.

In 1988 the P100 received a final upgrade utilising the Sierra body and production of the P100 for the European market switched to Portugal until 1993.

Ford P100, Classic Motor Show, NEC, Birmingham,

This particular 1987 Ford P100, seen at the Classic Motor Show a couple of years ago, originally carried a Ford Cortina Mk V front end, but it has been modified to carry older Cortina Mark III wings, bonnet and nose.

A newer Sierra P100 pick up body has been added to the back and it is powered by a Ford Cologne 2.9 litre / 176 cui V6 as used to power the later Ford Granada/Scopio models, the interior includes Porsche 944 seats.

Thanks for joining me on this “DIY Bakkie” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t forget to come back now !

Share

Armless Fun – Ford P100

The origins of the car based Ford P100 pick up lie in South Africa where the first P100’s were built using the front half of a 2 door Ford Cortina Mk 3 and a ladder chassis for the rear in 1971.

Armless Fun, Ford P100, Silverstone Classic

Similar vehicles followed with the front half of 4 door Ford Cortina Mk’s 4 and 5 from 1977 and 1980 respectively, with export of the model to Europe beginning in 1982.

Armless Fun, Ford P100, Silverstone Classic

In 1988 with the withdrawal of Ford from South Africa a new P100, designed by Ford of N
Britain such as the one featured today, with the front half of the 4 door Ford Sierra shell was built in Portugal and offered with either a heavy duty 205 block 2 liter / 122 cui Pinto or 1,8 liter / 109 cui turbo diesel motors.

Armless Fun, Ford P100, Silverstone Classic

The running gear for the P100 came from the parts pins of the Ford Granada saloon sedan and Ford Transit Van models and the pick up was given a 1000 kg / 2200 lbs load capacity.

Armless Fun, Ford P100, Silverstone Classic

With so much of the P100 being based on a car it does not cost an arm and a leg to run a modified one with lots of competition parts, Armless Fun has front panels below the bonnet hood that come from the Ford performance ‘RS’ catalog including the aggressive twin head light units.

Armless Fun, Ford P100, Silverstone Classic

Armless Fun seen here at last years Silverstone Classic goes further than most in the modification stakes having a supercharged 4.6 liter / 280 cui Rover V8 derived motor under the bonnet / hood providing just enough power to make Armless Fun UK Burnout Champion from 2007 – 2010.

Thanks for joining me on this ‘Armless Fun’ edition of ‘Gettin’ a li’l psycho on tyres’ I hope you will join me again tomorrow when I’ll be looking at a vintage MG. Don’t forget to come back now !

Share