Tag Archives: Williams and Pritchard

Rodney’s Racer – Warrior Bristol

Between 1952 and 1953 Rodney Nuckley, believed to be related to one of the directors of the Warrior Tap & Die Company in Hertfordshire, was carving out a winning reputation as a driver of Cooper Cars in the open wheel Formula 3 and Formula 2 series, particularly in Scandinavia. He crashed his Cooper Bristol Formula 2 car at the end of season Snetterton meeting in October 1953.

Rodney, who had driven under the Ecurie Richmond banner, commissioned engineer and Ecurie Richmond mechanic Bernard Roger to design a 2 litre sports car chassis using the Bristol engine and transmission from the Cooper.

The Warrior chassis featured de Dion rear suspension and Cooper 4 lug wheels, the sinuous body is said to have been the handy work of Williams and Pritchard.

Warrior Bristol, Sonoma Historics

Known race records for the Warrior show that Formula 3 driver Roger Biss drove the Warrior on it’s debut at Siverstone in May 1954 to a 4th place finish.

Rodney’s only outing in the car, appears to have been, at the British Grand Prix meeting at the same venue two months later where he recorded a 9th place finish (3rd in class), soon after winning at least once more in a Formula 3 race run at Västkustloppet in Sweden in July 1954 Rodney appears to have stopped racing.

Roger Biss then appears to have taken over ownership and the driving duties of the Warrior scoring best finishes of 2nd at Brands Hatch and Silverstone in 1955.

Warrior Bristol, Sonoma Historics

By August of 1955 the Warrior was acquired by JD Lomas and from the only known results appears to have won the 2 litre sports car race at Aintree on the cars debut and finished at the some venue on the same day in the handicap event.

The Warriors next owner, Bernie Arnold, took the car to Macau where it appeared in the 1956,’57 and ’58 Macau Grand Prix and in 1960 Bernie won the Johore Coronation Grand Prix driving the Warrior.

When the Bristol motor expired Bernie replaced it with a Jaguar motor and in that form Tim Robertson drove the car to win the sports car event at the 1970 1970 Singapore Grand Prix.

Warrior Bristol, Sonoma Historics

The Jaguar motor was replaced with an original spec Bristol motor when the Warrior was restored by Ian Boughton in Western Australia after he bought it in 1978.

The Warrior painted red remained in Australia from the 1970’s until 1999 when Dick Willis sold it to Jack Perkins in California.

My thanks to Geoffrey Horton for sharing his photo’s of the Warrior Bristol which were taken at Sonoma Historics earlier this year and to Dick Willis and everyone who contributed to the Rodney Nuckey thread at The Nostalgia Forum.

Thanks for joining me on this “Rodney’s Racer” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again for the story behind a unique Formula 5000 car tomorrow. Don’t forget to come back now !

PS Soon after this blog was posted Cooper997 posted a press cutting from Motor Racing December 1953 on The Nostalgia Forum which reports the build of the Warrior and goes on to say that Rodney and Bernard projected building a Formula One Car with a “modified Lagonda (David Brown type) engine.

Share

140mph Tortoise – Gordon-Keeble

Like the Warwick GT the origins of Gordon-Keeble lie in Peerless Cars Ltd. In 1959 co founder of Peerless John Gordon teamed up with engineer and racing driver Jim Keeble to build a GT car for USAF pilot Rick Neilson who suggested fitting a a 4.6 litre 283 cui Corvette V8 into a Peerless chassis.

The steel body for the Gordon GT was designed by Giorgetto Giugiaro working for Bertone who crafted it. The Gordon GT was assembled from scratch over 3 months just in time to be exhibited on the Bertone stand at the 1960 Geneva Show, where they it was well received. Autocar would later test the Gordon GT and proclaim that it was “the most electrifying vehicle that it has ever tested.”

Gordon Keeble, Haynes International Motor Museum

The Gordon GT was later taken to the USA where Chevrolet executives gave the green light for the supply of 5.4 litre / 327 cui to be fitted to a production version of the Gordon GT known as the Gordon-Keeble.

During an advertising shoot for Gordon-Keeble a tortoise wandered on to the set and it became immortalised in the Gordon-Keeble badge. The prototype achieved 70 mph in first gear and had a top speed of 140 mph.

Gordon Keeble, Goodwood Revival

Due to problems with the supply of some parts, in particular the Adwest steering boxes which were held up due to ‘industrial action’ by Adwest employees, the Gordon-Keeble did not go into production until 1964, by which time it was decided to use a fiber glass body similar to the Bertone original built by Williams and Pritchard.

Gordon-Keeble struggled financially until 1965 when it collapsed with 91 cars built. The company was almost immediately revived as Keeble Cars Ltd who built 8 more cars to the Gordon-Keeble specification before insolvency struck again. One further example was constructed from parts in 1971.

Gordon Keeble, Haynes International Motor Museum

In 1968 John de Bruyne bought the rights to manufacture the Gordon-Keeble and he built a further two cars badged as De Bruynes that were shown at the ’68 New York Auto Show.

The two cars seen here’ at Haynes International Motor Museum and Goodwood Revival were both first registered in January 1965, the blue one on the 12th and the red on the 14th.

Thanks for joining me on this “140mph Tortoise” edition of “Gettin’ a lil’ psycho on tyres” I hope you will join me for a look at an Indy Car tomorrow. Don’t forget to come back now !

Share