Tag Archives: Chevrolet

Dan’s McLeagle – McLaren Chevrolet M6B # 50-10 (Trojan)

The inaugural Can Am Challenge run in 1966 had been a huge successes with four different drivers winning the six races, two of them world champions, and Lola winning 5 of the races with Chaparral winning the other. For 1967 the complexion of the series would change completely as what became known as the Bruce and Denny steamroller gathered momentum with the Traffic Yellow McLaren M6’s.

Denny Hulme won the opening 3 races of the series leading team owner Bruce McLaren home in the second and third. Bruce then won the forth and fifth rounds by which time Bruce and Denny had secured first and second places in the championship. At the last race of the 1967 Can Am season the Traffic Yellow steam roller came to a temporary if grinding halt when Bruce and Denny both retired to leave 1966 Can Am champ John Surtees to take a consolation victory in his one year old Lola T70 MkII.

For 1968 Bruce McLaren stepped his team up another gear with the McLaren M8, while offering a production version of the previous years winner known as the M6B which was manufactured by Trojan, the same company that had once built bubble cars under licence from Heinkel and taken over the Elva racing car business, prior to building production versions of the Mclaren M1.

McLaren Chevrolet M6B, Goodwood Festival of Speed

Dan Gurney, who won the second race in the inaugural 1966 Can Am Challenge with his Ford Powered Lola T70 MkII, decided to replace the aging car with a McLaren M6B for himself and a Lola T160 for his team mate Swede Savage, both cars remained Ford small block (under) powered running with Westlake heads for the 1968 season.

To try and beat both the works Chevrolet powered McLaren M8’s and the customer M6B’s run by Penske for Mark Donohue with Chevrolet Power and the Ford 427 cui big block powered Shelby McLaren M6B of Peter Revson and the Motschenbacher Racing Enterprises example driven by Lothar Motschenbacher Dan’s All American Racers (AAR) team embarked on a continuous programme of development centered mostly on the M6B #50-10 featured today.

As well as lightening the M6B with exotic materials as used in the Eagle Formula One programme they continually upgraded the body work.

McLaren Chevrolet M6B, Goodwood Festival of Speed

AAR missed the opening round of the 1968 Can Am challenge where 1967 World Champion Denny Hulme led his countryman and team mate Bruce McLaren home in yet another Traffic Light Yellow walk over. At the following race run at Bridgehampton Denny and Bruce both retired with broken motors having started 1st and 2nd on the grid leaving Mark Donohue to win in his Chevrolet powered Penske M6B from Jim Hall in his Chaparral 2G.

Motschenbacher came home third in his Ford powered M6B ahead of Swede Savage in the small block Ford powered AAR Lola T160 which had started just 17th. Dan qualified 6th and finished 6th on his debut in the M6B. The Bridgehampton result would remain the teams best finish of the season as AAR experienced a variety of ills including chronic unreliability from the underpowered Gurney Westlake developed motors for the remainder of the 1968 season, Gurney and Savage even swapped cars for the last two races of the 1968 season with no appreciable difference in the results.

Denny and Bruce McLaren again topped the points standings this time Denny was Champion with three wins to the single win for Bruce. Mark Donohue finished the season third with one win. Canadian John Cannon won at Laguna Seca to score the only Can Am win in the now three year old McLaren M1B model at Laguna Seca.

McLaren Chevrolet M6B, Goodwood Revival

For 1969 Dan persevered with just the #M6B-50-10 which was by now so heavily modified it became known as the McLeagle, the reliability of his motors did not improve and midway through the season he missed a couple of races in order to install a big block Traco Chevrolet. Ironically when Dan returned to the fold with his M6B at Michigan his Bow Tie power developed an oil leak in practice and he ended up taking Jack Brabham’s intended drive in a third works McLaren M8B alongside Denny and Bruce.

Having failed to set a time in practice Dan started from the back of the field and finished third behind Bruce and Denny in a 1-2-3 finish for the McLaren team. At Laguna Seca Dan was back in his own car in which he qualified 4th but retired with a blown piston. Dan’s best ever result driving #50-10 after nearly two seasons of trying came at Riverside where he qualified fifth and came home 4th.

Dan skipped the last round of the 1969 Challenge at Texas motor speedway and ended the season equal 11th in the standings with Mario Andretti who had driven a Holman Moody entered M6B powered by a big block 427 Ford. The Challenge title went to Bruce McLaren who won six races of the expanded 11 race series with team mate Denny Hulme winning the remaining five races in what had been another Traffic Yellow wash for McLaren.

McLaren Chevrolet M6B, Goodwood Festival of Speed

Dan sold the #50-10 to Bob Brown for the 1970 Can Am Challenge, Bob also scored a couple of 4th place finishes which with 3 other minor points finishes in the further modified car was enough to secure 9th in the Challenge table.

With the death of Bruce McLaren in a testing accident at Goodwood, before the 1970 Can Am challenge got under way, Dan was drafted into replace the McLaren team founder and ended up winning the first two races of the season while Denny Hulme was driving with severely burned hands received while practicing for the Indy 500. Denny went on to win six of the remaining 1970 Can Am races to secure his second Can Am title and Mclaren’s third consecutive title.

By 1971 Dan had retired from race car driving, while Bob Brown soldiered on in #50-10 scoring a season high 6th place finish at Mosport. Bob sold the car onto RS Enterprises for the 1972 season during which Frank Riemann and Dave Causey were entered into at least three events Causey finishing a best 16th in the Can Am round held at Donnybrooke.

#50-10 is known to have been driven by Jigger Sirois in the Can Am race at Road America in 1973 and by Bob Svast at Road Atlanta in a US Champions event in 1974, from which the car was retired on both occasions. The car has been restored to it’s high wing 1969 spec as seen in these photo’s, taken at Goodwood last year, with owner Andy Boone at the wheel.

My thanks to TNF’ers raceanouncer2003 Vince H, for enlightening me about the development of today’s M6B and Gurney’s Lola T160 and to kayemod Rob for showing me a tin of the Traffic Yellow 11040 LR Rylands Polyester Colour Paste used to pigment the works McLaren fiber glass body work.

Thanks for joining me on this “Dan’s McLeagle” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow for a look at a McLaren M8 C/D. Don’t forget to come back now !

Share

Burgandy & Cream – Ferrari 250 Europa Coupé Pininfarina #0305EU

After a meeting between Batista Farina, in 1961 to become Batista Pininfarina, and Enzo Ferrari at a restaurant in Tortona, a small town halfway between Turin and Modena, Batista drove home an told his son Sergio “From now on you’ll be looking after Ferrari, from A to Z. Design, engineering, technology, construction—the lot!”. Sergia says he was over the moon with happiness and one of the fruits of that conversation is today’s featured Ferrari 250 Europa Coupé chassis #0305EU delivered in late September 1953.

Ferrari 250 PF Europa Coupé, Goodwood Festival Of Speed

According to the blurb about this car seen at Goodwood, #0305EU was originally commissioned by a friend of Batista Farina called Latino Magnolfi, given the PF job number 12531 chassis #0305EU features unique to the 250 Europa Coupé model 3/4 windows a shorter windscreen and larger grill than the other 250 Europa’s. Magnolfi used to enter the car in Concours d’Elegance events before he sold the car.

Ferrari 250 PF Europa Coupé, Goodwood Festival Of Speed

The exact history of the #0305EU after the sale is not known to me but it ended up in the USA and after the repair of the 3 litre / 183 cui V12 motor became uneconomic the motor and gearbox was swapped for a Chevrolet V8 and and associated transmission.

Ferrari 250 PF Europa Coupé, Goodwood Festival Of Speed

In 2006 current owner Jan de Reu acquired the car which has been fully restored to its white wall tyre two tone Burgundy and Cream splendor, with a correct Colombo designed Ferrari V12 motor, by Ferrari Classiche.

Ferrari 250 PF Europa Coupé, Goodwood Festival Of Speed

As some of my regular readers may remember the Ferrari 250 Europa is closely related to the Ferrari 375 America, the later of which is powered by a larger 4.5 litre 274 cui Aurelio Lambredi designed long block V12.

Thanks for joining me on this “Burgandy & Cream” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I be looking at Dan Gurney’s Can Am McLeagle. Don’t forget to come back now !

Share

Three Engineers From Detroit – Wolverine LD65 #LD65/1

The story of the Wolverine Chevrlolet LD65 according to one of it’s former owners, began at a race where Jerry Hansen was driving his successful McKee Chevette and was blown into the weeds by a front engined car. When Jerry approached the team in the pits after the race and asked who they were they responded “three engineers from Detroit”. One of the engineers was Lee Dykstra who would make a name for himself with the Jaguar XJR5 IMSA car and a number of Indy Cars.

When Jerry asked why the three engineers did not build a rear engined car they replied they did not have the money so Jerry wrote them a cheque and asked the three engineers from Detroit to build him one.

The Wolverine designed by Lee Dykstra and George Anderson first appeared in a national SCCA race at Greenwood which Jerry Hansen won, Jerry then recorded a did not finish at Mid-Ohio before appearing at the inaugural Can Am Challenge at St Jovite in September 1966. Jerry qualified 25th and finished 20th.

Wolverine LD65, Goodwood Revival

Jerry never raced the Wolverine again, it would appear that the week before St Jovite Jerry was due to share a McLaren Elva Mk II with Charlie Hays in the Road America 500. However, after his friend and fellow Minneapolis/St Paul, Minn., resident Don Skogmo was killed driving a Lola T70 Mk II, in an accident during practice for the same race, Jerry withdrew from the event handing his ride in the Hayes McLaren to Earl Jones.

It is thought Jerry raced the Wolverine at St Jovite before sitting out the remainder of the year due to pressure from his family to retire from driving. The following year Jerry returned to racing and did not retire permanently until 1986, by which time he had clocked up a record 27 National Sports Car Club of America titles. Today the Hansen name is still connected to racing through his daughter Courtney an actress, author and presenter of motoring related television shows including Powerblock.

Jerry sold the Wolverine to Owen Rutherford who bought the car for Frank Opalka. In 1968 Frank recorded a DNF in the Road America 500 miles with Bob Lyon, and by Franks account scored many more DNF’s before the bugs were sorted out in “SCCA and USRRC” events. Frank relates how once the car was reliable he would be congratulated for finishing.

Wolverine LD65, Goodwood Revival

Frank also tells a good tale about a sponsor “Miami Serpenterium” who required that the car be painted all over with snakes. At Road America Owen turned up with a “station wagon loaded with poisonous snakes” one of which, a cobra, escaped and bit sponsor Bud Severens who required Buds hospitalisation, a story which made the local news. Apparently Bud never did work out how the cobra came to be in Wisconsin.

Jim Place became the next owner of the car and it is in the colours that Jim painted the car that it appears today. Jim is known to have been on the entry list for at least two Can Am events he is recorded as not arriving at the race at Michigan International in September 1969. Jim qualified 24th at Road America in August 1970 but did not start the race which is the last of the Wolverines appearances known to me.

The car is now raced by Morgen Christensen who is seen at the wheel above at Goodwood a couple of years ago. The red car alongside Morgens is the Rolls Royce powered Marina driven by Mark Ashworth.

My thanks to all those including Frank Opalka who commented on the Wolverine thread at The Nostalgia Forum, and especially Tom “RA Hisotrian” Schultz who revealed why Jerry Hansen’s career with the Wolverine was so short lived.

Thanks for joining me on this “Three Engineers From Detroit” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I’ll be having a French sojourn. Don’t forget to come back now !

Share

The Surtees Hill Lola – Lola Chevrolet T70 Mk II Spyder SL71/43

Team Surtees started running Lola T70’s in sports car races in 1965, for 1966 the teams proprietor, 1964 World Champion, John Surtees ran a Chevrolet Mk II spyder variant, chassis #SL71/17, in the Canadian American (Can Am) Challenge winning the inaugural Can Am race at St Jovite from pole with the car.

Surtees retired from the next couple of Can Am races with a broken oil pipe and then after a start line accident at Bridgehampton and Mosport respectively. At Laguna Seca the team had a new chassis #SL71/43, today’s featured car, which he qualified 7th but retired for a third time after 92 laps with suspension damage.

Knapfield, Lola T70, Goodwood Revival

John Surtees returned to chassis #SL71/17 at Riverside where he qualified second and won, 1962 World Champion and 1966 Indy 500 Winner Graham Hill was drafted into chassis #SL71/43 and came home third from 5th on the grid in the cars final appearance for Team Surtees.

Knapfield, Lola T70, Goodwood Revival

Surtees went into the final round of the 1966 Can Am Challenge at Stardust International Raceway in Las Vegas sharing the series lead with 1961 World Champion Phil Hill who was driving a Chaparral 2E.

Despite qualifying 4th behind Jim Hall on pole with his Chaparral team mate Phil Hill beside him and Chris Amon in a McLaren Elva in third, John Surtees forced his way through to the lead on the opening lap. John did not relinquish that lead for the entire 70 lap race and so secured the inaugural Can Am Championship.

Chassis SL71/43 was acquired by George Ralph for 1968 his best results with the car were two 11th place finishes one in the USRRC Championnat Nord-Americain race held at Mont-Tremblant from 17th on the grid and the other in the Road America Can Am race from 21st on the grid.

Current owner Paul Knapfield is seen driving the car at the 2011 Goodwood revival in these photo’s.

My thanks to Tom RA Announcer Schultz for kindly visiting his den to dig out the chassis details of today’s featured car from his copy of Lola T70 – The Design, Development & Racing History Hardcover – December 1, 2012 by John Starkey and Franco Varani.

Thanks for joining me on this “The Surtees Hill Lola” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t for get to come back now !

Share

Jim’s Favourite – Chaparral Chevrolet 2E

To celebrate the 40th anniversary of my introduction to the wonders of The Canadian American Challenge Cup in something approximating real time mediated through the pages of ‘Motor Sport’ magazine, for the remainder of the month I’ll be featuring a selection of Group 7 race cars; on Saturday’s, Sunday’s, Mondays and the last two Thursdays of the types used in the Can Am Championships run from 1966 to 1973 or European “Intersiere” races run from 1970.

Chaparral 2E, Goodwood Festival Of Speed

The inaugural 1966 “Can Am” Challenge race was run at St.Jovite on 11th September 1966 and won by 1965 World Drivers Champion John Surtees driving a Team Surtees Lola T 70 Spyder.

Chaparral 2E, Goodwood Festival Of Speed

Texas Oilman and innovative engineer Jim Hall and his Chaparral team made their debut in the Series at Bridgehampton the following week where Hall was to drive the #66 Chaparral 2E chassis #2E001 with 1961 World Champion Phil Hill in the identical sister #65 chassis #2E002.

Chaparral 2E, Goodwood Festival Of Speed

Come the start of the event it was Phil Hill who found himself at the seat of chassis #2E001 starting fourth, after Hill’s intended car developed chassis problems during practice and Jim handed the world champion Phil his own car.

Chaparral 2E, Goodwood Festival Of Speed

Phil finished the race in 4th place behind the Lola Ford T70 of Dan Gurney, the McLaren Elva Mark II Chevrolet driven by Chris Amon and the Mark IIb McLaren Elva Chevrolet driven by Bruce McLaren.

Chaparral 2E, Goodwood Festival Of Speed

Like most vehicles of the time the Chaparral 2E featured three pedals, unlike most, the pedals operated the accelerator and brakes while the third operated a front spoiler beneath the nose and rear wing to adjust the amount of drag created to maximise the vehicles performance around the corners and along the straights of a circuit.

Chaparral 2E, Goodwood Festival Of Speed

Two unusual features of the drive train were, first the 450 hp aluminium alloy block 5.4 litre / 327 cui Chevrolet V8 chosen in favour of the more powerful and heavier 5.9 litre iron block Chevrolet Motor used by John Surtees in the Lola, and second the Chaparrals were uniquely equipped automatic transmissions.

Chaparral 2E, Goodwood Festival Of Speed

Although similar aerodynamic devices had been attached to competition vehicles before, notably by Mercedes Benz who attached a wing to the roof of their 300 SL during practice for Le Mans in 1952 and by Fritz von Opel who attached wings to the sides of his 1928 solid rocket fueled Opel RAK 2, when activated to give down force at the expense of increased drag and decreased forward speed the Chaparral 2E’s aerofoil shaped wing transmitted down force directly through the rear suspension, while a spoiler under the nose acted similarly to increase down force on the front suspension, which together improved the handling in the corners.

Chaparral 2E, Goodwood Festival Of Speed

The Challenge returned to Canada one week later again on September 24th 1966 for the ‘6th Canadian Grand Prix for the Pepsi-Cola Trophy’ run Mosport Park. Hall qualified 9th and Hill 11th with Hill finishing second to Mark Donohue in a Penske run Lola Chevrolet T70. Jim retired at 1/3 rd distance with an engine problem.

Chaparral 2E, Goodwood Festival Of Speed

Nearly a month later on October 16th 1968 Jim Hall started the Monterey Grand Prix run at Laguna Seca from pole position in his #66 2E and alongside him on the grid was Phil Hill in the #65. After 2 hours at the wheel during which he covered 106 laps Phil Hill crossed the line first ahead of team owner Jim Hall to score a remakable team 1-2 finish.

Chaparral 2E, Goodwood Festival Of Speed

Jim qualified 3rd behind, John Surtees in the Lola, at Riverside in California. John and Jim both moved up a place after pole sitter Bruce McLaren retired with an ignition problem. Phil Hill could only qualify 8th and retired after seven laps with fuel pressure issues.

Going into the final round of the Challenge Phil Hill was tied on points with John Surtees with 5 other drivers including Jim Hall capable of winning the championship depending on a variety of finishing scenarios. Jim qualified on pole for the final round at Las Vegas but after a few laps his wing started flapping uncontrollably due to fatigue failure in the control mechanism causing his retirement from second after Surtees took a dominant lead from the start. Hill damaged his car and ran much of the race scraping over 4th place until his wing also failed. Surtees easily won the race and the Inaugural Can Am title ahead of Mark Donohue with Hill finishing out of the points his championnship chances were shot.

A Chaparral 2E chassis 2E002 was entered in three events at the 13th Bahamas National Speed Weeks for Jim Halls Chaparral Cars Inc partner Hap Sharp. Hap won the Governor’s Trophy & Nassau Tourist Trophy from pole, finished 5th in the Nassau Classic Race and a non running 4th, again from pole in the Nassau Trophy Race in which Hap had an accident.

In 2005 Jim Hall teamed up with Jim Musser, who had contributed to the design of the 2E, known to be Hall’s favourite, to build a ‘limited number’ of continuation Chaparral 2E’s for use by classic racers. More on the continuation cars can be seen on this link to the Chaparral Official Website.

My thanks to Kayemod Rob, Tony 2F-001 Pashley, Supersox and Allen Brown Duc-man and mariner at The Nostalgia Forum for helping me to conclude that the car featured today maybe the surviving original 2E but is most likely one of two continuation models.

Thanks for joining me on this Jim’s Favourite edition of “Gettin a li’l psycho on tyres”, I hope you will join me again tomorrow when I’ll be looking at a Can Am Lola T70 Spyder. Don’t forget to come back now !

Share

More Fuel – McLaren Ford M14A #M14/2

Going into 1970 things were looking up as McLaren Cars entered their seventh year. The team had won three consecutive Can Am Championships, 2 for Bruce McLaren and one for Denny Hulme, the inaugural European Formula F5000 championship with Peter Gethin and four championship Formula One races one for Bruce McLaren and three, including the last race of 1969, for Denny Hulme.

In addition to these racing programs for 1970 McLaren were to embark on an Indy program with the new turbocharged McLaren Offy M15 and were contracted to run an Alfa Romeo V8 powered car alongside their new Ford powered M14A Formula One car.

McLaren Ford M14A, Goodwood Revival

The new M14A was an improvement of the 1969 McLaren M7C, itself based on a Formula F5000 M10A chassis with McLaren M7A Grand Prix winning suspension.

The main feature of the new car was the narrower internal dimensions of the monocoque which were necessary to accommodate larger fuel tanks required by the ever more powerful and thirsty Ford Cosworth DFV V8’s.

McLaren Ford M14A, McLaren Manchester, Knutsford

The McLaren M14A was used in all but one race in the 1970 Formula One championship season. It’s best result was on it’s debut in South Africa where Denny Hulme finished second, driving I believe today’s featured car. Bruce McLaren matched that in Spain where he also finished second. After the Monaco Grand Prix where Denny finished forth disaster struck as first Denny was badly burned after his car caught fire in testing at Indianapolis and then a couple of weeks later Bruce was killed while testing the M8D Can Am car at Goodwood.

The team consequently missed the Belgian GP and reappeared at the Dutch Grand Prix with Dan Gurney driving the lead car #M14/1 and 1969 European Formula 5000 champion Peter Gethin making his Formula One championship debut driving today’s featured chassis, both cars retired. Denny Hulme still suffering from burned hands was back in time for the French Grand Prix alongside Dan Gurney and the pair came in 4th and 6th respectively.

#M14/2 is seen at the McLaren Manchester show room in Knutsford above.

McLaren Ford M14A, Goodwood Festival Of Speed

Dan Gurney retired from Formula One after retiring from the British Grand Prix where Hulme finished a remarkable 3rd. Peter Gethin was back in the team for the German Grand Prix where Denny again finished 3rd. Denny retired from the Austrian GP but at Monza for the Italian Grand Prix he came home 4th. Peter Gethin scored his first World Championship point at the Canadian Grand Prix where he finished 6th and Denny rounded out a painful year with a third in the Mexican Grand Prix finishing 4th in the Formula One Championship points table.

Incredibly despite his injuries Denny had also won 6 of the 10 Can Am Championship rounds enough to win the 1970 Chamionship his second Can Am Crown and McLaren Cars 4th consecutive championship aided by a further win from Peter Gethin who also won a second consecutive European Formula 5000 title driving a McLaren. The US, New Zealand and South African Formula 5000 thousand championships were won by John Cannon, Graham McRae and Bob Olthof respectively all also driving McLarens.

McLaren Ford M14A, Goodwood Festival Of Speed

For 1971 #M14/2 was driven by Peter Gethin to two second place finishes in non championship races at Oulton Park and Brands Hatch, the best championship result Peter had from 3 championship start in the car was 8th in the 1971 Spanish Grand Prix.

Jackie Oliver joined McLaren for the British Grand Prix where he qualified #M14/2 22nd but a bungled flag drop saw Jackie crash into Graham Hill at the start causing instant retirement for both and a £50 fine for Jackie. The cars final works appearance was at the 1971 Italian Grand Prix where Jackie qualified 13th and finished 7th in a close fought race won by Peter Gethin now driving a BRM.

McLaren Ford M14A, Goodwood Festival Of Speed

#M14/2 next appeared with a Formula 5000 Chevy stock block V8 motor in the hands of Tony Dean who’s best result was a 10th place finish in his first start in the car at Mondello Park. On his seventh and final attempt, which included retirements from races at Elkhart Lake and Brainerd, to race the car Tony failed to qualify for the non championship 1972 John Player Challenge Trophy at Brands Hatch.

In 1973 at the same venue Willie Wood failed to qualify #M14/2 for the Formula F5000 race or non championship Race of Champions and was not classified in a further appearance at Oulton Park. Allan Kayes then bought #M14/2 was also unclassified at Brands Hatch, finished 11th at Oulton Park and then retired, failed to qualify or failed to start in 12 further races most of which were rounds of the 1974 European Formula 5000 championship.

Thanks for joining me on this “More Fuel” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t forget to come back now !

Share

Balena Close, Poole, Dorset – Penske PC1 #001

After he had finished fabricating the Len Terry designed Eagle monocoques for All American Racers (AAR) in California, John Lambert returned to the Untied Kingdom and started a new business which was located on a small industrial estate outside Poole in Dorset where the rent was cheap. When Len Terry fell out with Frank Nichols they wound up Transatlantic Automotive Consultants based in Hastings where they had designed the AAR Eagle and Terry went to join Lambert, with whom he had worked at Lotus and AAR, in Poole starting a new business together called Design Auto.

In 1969 Len Terry started to design a series of stock block Formula 5000 open wheel cars called Leda’s, John Lambert looked after the construction of them in a facility off Balena Close on the Creekmore Industrial Estate on the outskirts of Poole, Dorset. When Leda Cars ran into financial difficulty they merged into the Malaya Garage Group in 1970. Three years later Malaya Garage Group did a deal with New Zealand racer Graham McRae selling the Leda Cars premises “lock, stock and barrel” with the cars manufactured now rebranded as McRae’s.

At around this time Roger “The Captain” Penske and Mark “Captain Nice” Donohue were experiencing many successes on the US racing scene which included three Trans Am championships, then only for manufacturers, driving the Captains Chevrolet Camaro in 1969 and AMC Javelins in 1970 and ’71.

In 1972 Mark won the Indy 500 in Roger Penske’s McLaren M16 and at the end of the year drove Penske’s McLaren M19 in the Canadian and US Grand Prix finishing a more than credible 3rd in his debut Grand Prix. The following year Mark and Roger won the Can Am championship with the “Turbo Panzer” Porsche 917/30. Having achieved pretty much everything in the US, including a NASCAR Winston Cup win at Riverside driving a Penske AMC Matador to become the last ‘road ringer’ to win a non oval race in that series back in 1973 Mark announced he would hang up his helmet at the end of the season.

Roger Penske made plans for a Formula One team in 1974 and sent Heinz Hofer to look at Graham McRae’s ‘low profile’ premises on the Creekmore Industrial Estate in Poole, Dorset UK as a possible base and concluded a deal for the premises. The Ford Cosworth DFV powered Penske PC1 was built to a design by Geoff Ferris and Mark Donohue was persuaded to come out of retirement to drive the car on it’s debut in the 1974 Canadian Grand Prix where he qualified 24th and finished 12th 2 laps down.

Penske Ford PC1, US Grand Prix, Watkins Glen

At the US Grand Prix, where Mark Donohue and Roger Penske fan, Brian Brown took today’s photograph of Mark in the PC1 at Watkins Glen the car started 14th on the grid, but retired after 27 laps with rear suspension problems. Brian recalls his first visit to a Grand Prix thus :-

“I was of course very excited to be seeing Mark race again, but being that it was my first live Formula One event, I was equally excited to be seeing Mario’s effort with Vel’s Parnelli Jones and the rest of the grid in person. We owned a Ferrari 365 GTB/4 Daytona and a 246 GT Dino at the time, so were very supportive of the Ferrari effort too.

My brother, friends and I spent a great deal of down time in the Kendall Garage watching the teams go about their business of working on the cars. One thing that was apparent was the absolutely professional presentation of the Penske team. Everything was spotless, just like their successful Indy Car counterpart that I’d observed in person since 1969 at Indianapolis. I was then, as now, a huge fan of Mark Donohue and Team Penske, but that aside, I always felt that they had too many positive resources not to be successful in Formula One.

I knew racing well enough to understand how tall the task Mark and the Penske team had ahead of them, but I also had the highest faith in their collective talents that I felt, given time, they would come right. I look back now and remember how I’d call in to our local ABC news tv affiliate to get the results of the races in 1975, always asking about the top six finishers along with Mark and Mario’s results.

Then came Austria and it was over for Mark and eventually Penske stopped the project – I was always appreciative that they carried on to get the victory with John Watson in Austria a year after Mark’s accident, something of a vindication for the mighty challenges that Team Penske faced in their Formula One foray. Watkins Glen 1974 was the last I ever saw Mark in person and despite the nearly 40 years that have passed, it seems like yesterday.”

Penske ended up building 3 chassis to the PC1 design chassis #001 seen here achieved a best 5th place finish, from 16th on the grid in the 1975 Swedish Grand Prix. Three races later Penske ditched the PC1 in favour of a March 751 which was raced until a new challenger until the new Penske PC3 was ready. As Brian alluded to above Mark Donohue was killed during practice for the 1975 Austrian Grand Prix after a tyre deflated pitching him off the track in to an accident which killed a marshal. Although Mark initially survived the incident he died the next day from a cerebral hemorrhage.

The debut of the Penske PC3 was delayed until the 1975 US Grand Prix where John Watson drove it in practice. Due to a misfire with the motor in the new car the team elected to wheel out today’s featured chassis one more time, John qualified 12th, finishing the race in 9th.

The following season Penske entered John in the PC3 and later PC4 models. With the latter the team won the 1976 Austrian Grand Prix, despite this success The Captain closed the Formula One program down at the end of 1976, deciding his future lay in the US racing seen where he would become the dominant force in Indy Car racing, with many of his winning cars being built in Poole, Dorset. Penske maintained facilities in Poole Dorset up until 2006. When the factory was closed one employee, Ivor, remained who had been part of the story going back to the Leda days, through the McRae years and into the Penske era.

In 2012 Brad Keslowski won his first NASCAR Championship driving a Penske entered Dodge a hitherto elusive goal on ‘The Captains’ to do list.

My thanks to Brian ‘ B² ‘ Brown for kindly agreeing to share his photograph; to kayemod, Nigel Beresford, Tim Murray, Tony Matthews, Dogearred and Doug Nye at The Nostalgia Forum for their help in piecing together the story behind Roger Penske’s presence in Poole, Dorset and a tenuous connection in the form of Lambert & Terry and their Leda Cars premises between the AAR Eagle and Penske Formula One efforts.

Thanks for joining me on this “Balena Close, Poole, Dorset” edition of “Gettin’ a li’l psycho on tyres”, I hope you will join me again tomorrow. Don’t forget to come back now !

PS Shortly before this blog was posted some confusion has come to light about which buildings in Poole Penske and McRae occupied and when, local resident kayemod and Nigel Beresford who worked for Penske have confirmed that Penske took over the Balena premises from McRae, while artist Tony Matthews is sure he visited a second facility a couple of miles away on Factory Road to do cutaway drawings for McRae and Penske is not so sure the Balena Close address is correct. If any further developments come forth I shall post them below, and if you know the answer to the riddle please do not hesitate to chime in.

PPS Nigel Beresford has kindly confirmed with another former Penske employee Nick Goozée that the Balena Close facility is the only one Penske purchased from Graham McRae. My thanks to Nigel and Nick for settling the matter so promptly.

PPPS

Balena Close, Poole, Dorset

Kayemod Rob from the Nostalgia Forum has kindly sent me this photo showing “how that corner of Balena Close looks today, the small unit to the right is the original Penske UK base, formerly McRae Cars. The three parked cars more or less cover the width of the premises. The ‘Elegance’ unit to the left of Penske was once FKS Fibreglass, later Griffin Design. My ex-Specialised Mouldings chum stylist Jim Clark worked at FKS, and as well as Penske’s stuff, they also did almost everything for the Gulf GT40s and Mirages among others, their unit extended leftwards to fill the corner of the block. Penske later rented an identical unit to the right of the pic, which doubled their floor area, after some of the dividing wall was removed, they used to run their F1 operation out of that.”

Thanks Rob.

Share