Tag Archives: Tony

Allard + Farrell + Maserati = The Farrallac MK2

The origins of the Farrallac featured today lie in the Allard J2, chassis J1911registration JWP 800, that rising star Peter Collins purchased and took delivery of in Kidderminster on March 29th 1951.

Allard J2

[Photo supplied by David Hooper copyright holder unknown, this photo will be credited or removed upon request]

Peter Collins seen above, possibly at Westwood Park, on the left drove JWP 800 to victories at two national events held at Gamston and at least one more at Croft where he set an outright lap record.

Farrell

After passing through the hands of a businessman in the Midlands JWP 800 ended up in the hands of cycle manufacturer Don Farrell who with his wife Stella, a champion cyclist, used the car to compete in hillclimbs and sprints.

Farrallac MK2, Silverstone Classic PD

In order to improve the stability and straight line speed of the cycle winged J2 Don built an all enveloping body for the vehicle and with the unoffficial aid of Allard draghtsman, later Chief Engineer, Dave Hooper fitted the car with wishbone front suspension.

Farrallac MK2, Silverstone Classic PD

The Farrallac Mk1 was used by the Farrells for two years until October 1959 when crossing the finishing line on a hillclimb near Marlow, having set Fastest Time of the Day a track rod broke which consequently sent the car over a barbed wire fence rendering JWP 800 beyond repair and left Don Farrell nursing his wounds in hospital.

Farrallac MK2, Silverstone Classic PD

While recovering Don planned The Farrallac Mk2 which he subsequently built in 1960

Farrallac MK2, Silverstone Classic PD

[Photo Courtesy David Hooper]

using the 400 hp 5980cc Cadillac engine,

Farrallac MK2, Silverstone Classic PD

Alvis gearbox and some of the suspension salvaged from JWP 800 which were fitted to a new twin tube chassis along with Alfin drum brakes.

Farrallac MK2, Silverstone Classic PD

David Hooper tells me the rear body work came from a J2

Farrallac MK2, Silverstone Classic PD

while the front was sourced from a Maserati.

Farrallac Mk2, Silverstone Classic, PD

With a top speed of 165 mph

Farrallac MK2, Silverstone Classic PD

The Farrallac Mk2 was campaigned by the Farrells covering standing 1/4 miles in 12 seconds.

Farrallac MK2, Silverstone Classic PD

In the mid sixties the Farrallac Mk2 passed into the hands of Burno Ferrari who replaced the Cadillac motor for a Ford then the car disappeared,

Farrallac MK2, Silverstone Classic PD

resurfacing in the hands of Tony Bianchi in the late 1970’s.

Farrallac MK2, Silverstone Classic PD

Tony spent seven years bring the car back to health finding a Cadillac engine and fitting it with “Offy” cylinder heads from a stock car. Tony still owns the Mk2 33 years later.

Bob Bull the passenger above tells me he saw an indicated 160 mph as he hung on to his helmet flying along Silverstone’s Hangar Straight.

My thanks to Bob Bull, Colin Warnes of the Allard Register, Allard Chief Engineer David Hooper, Simon Taylor, Classic and Sportscar Magazine (July 1985), The Nostalgia Forum members C Drewett, and Fuzzi for their photo’s and help with information for today’s blog.

Thanks for joining me on today’s Farrallac edition of ‘Gettin’ a lil’ psycho on tyres’ join me again tomorrow for another visit to Castle Combe. Don’t forget to come back now !

Share

Added Warrington – CGA Engineering

Thanks to Tony ‘Giraffe’ Gallagher at The Nostalgia Forum I found myself going to Warrington with fellow TNFer and secretary of the Bristol Pegasus Motor Club Tim Murray. The purpose of the journey was to visit Colin Bennett and his sons who run CGA Engineering.

Colin who worked with Emerson Fittipaldi on a Brazilian excursion with the Lotus Formula 2 team in 1970 has run a huge variety of cars including March, Fittipaldi, Surtees, Williams and Ligier in a variety of British and European Series.

Benetton B191, CGA Engineering

After a welcome which included tea and donuts Colin let half a dozen TNFers loose in his workshops to nose and poke around a mouth watering selection of vehicles, amongst the many demonstrations was how easy it would be to fire up an ex Schumacher 3 .5 litre / 213.5 cui Benetton 191 chassis #6 powered by a Ford HB engine, we were one click of a switch away from having our ears blown off !

Lola T70, CGA Engineering

At the opposite scale of the age range Colin was rebuilding a Lola T70 carrying the chassis plate SL76/143, there is something appealingly Romanesque about those knockoff wheel hubs.

March 71B, CGA Engineering

Sitting outside the workshops was a Formula 2 spec March 71B chassis #71BM -08 painted at the behest of current owner Katsu Kubota in the colours carried by one of my hero’s Ronnie Peterson who won the 1971 European Formula 2 Championship for open wheel 2 litre / 122 cui vehicles.

March 761, CGA Engineering

Back in 1976 I was extremely privileged to see this March 761 in action on a wet day of practice at the Nurburgring. The sight of this car driven by Ronnie Peterson in a series of controlled slides through a series of off camber blind apex corners is something I shall never forget. Ronnie qualified 11th and unfortunately was involved in a first lap accident.

Nissan R90CK, CGA Engineering

I was at Le Mans in 1990 when this Nissan R90CK qualified 5th for the 24 hour classic unfortunately the car retired on the opening lap, like the March 71B and 761/6 today this car belongs to Katsu Kubota and is scheduled to appear at the Silverstone Classic meeting I blogged about yesterday.

Williams FW06, CGA Engineering

The design details of the Williams FW06 by Patrick Head won much praise in 1978, although the car did not win any Grand Prix it marked the emergence of Williams Grand Prix Engineering into what would become a dominant force in Formula One in the 1980’s and 1990’s.

I shall look forward to bringing you more detailed blogs of some of these cars after I have seen them running in the weeks and months ahead.

My thanks to Tony, Colin and his sons for a memorable day.

Thanks for joining me on this Warrington edition of ‘Gettin’ a lil’ psycho on tyres’, I hope you will join me again tomorrow. Don’t forget to come back now !

Share

Gould Charge – Penske PC10

For 1982 Roger Penske had his manufacturing team in Poole, Dorset, England, where all his open wheelers were made, build 6 Penske PC10’s designed by Geoff Ferris. The cars were ready in October 1981, drivers Rick Mears and Kevin Cogan completed 3000 miles of testing during the off season.

AJ Foyt said of the legendary Penske preparation “The rest of us are trying to do as much in six days as Penske took six months to do.”

Penske Cosworth PC10, Rick Mears, Indianapolis Motor Speedway

Photo by Ed Arnaudin.

Rick Mears, took pole at with a record 207 mph average speed in the #1 Gould Charge seen here on the warm up lap for the race, and Kevin Coogan started 2nd with a 204 mph 4 lap average. The first two spots on the grid were sown up just 9 minuets after qualification had started on Pole Day. AJ Foyt filled out the front row.

The 1982 is best remembered for an accident at the start that took out Kevin Coogan, AJ Foyt, Mario Andretti, Dale Whittington and Roger Mears.

Blame for the incident was placed on the inexperienced Penske new boy Kevin Cogan, though the cause of the accident has ever been satisfactorily explained, it came to light many years later that Rick Mears had a similar incident in another PC10 during private testing that was kept out of the media at the time.

AJ Foyt managed to get out for the second attempt to start the 1982 Indy 500 but neither the repairs to Foyt’s #14 March nor the months of preparation at Penske were enough to keep Gordon Johncock, driving a Wildcat, from taking a photo finish victory in which Johncock held off Mears by just 0.16 secs.

During a 15 year Champ Car Career Rick Mears won 3 CART Championships, a record equalling, with Foyt and Al Unser, 4 Indy 500 victories and an unequalled six Indy 500 poles. Rick also took the most CART Championship race wins during the 1980’s.

While Mears and Penske lost the battle at Indy in 1982, they took a second consecutive championship in 1982.

The following season Al Unser Snr won the championship driving a Penske PC10B after the intended replacement PC11 proved unequal to the performance of the older car after the 1983 Indy 500.

Those interested in what lies beneath the super streamlined body of the PC10 might be interested to see a series of photos, taken by the extraordinary cutaway artist Tony Matthews, posted on The Nostalgia Forum, see post three and down of this PC10 thread.

My thanks to Steve Arnaudin for the scan of his Dad’s photo.

Thanks for joining me for this Gould Charge edition of ‘Getting a little psycho on tyres’ I hope that you will join me again tomorrow. Don’t forget to come back now !

Share

85% Stock Specials – Studebakers 1932 to 1933

Moving forward a couple of decades from yesterdays post today we are looking a couple of Studebakers that appeared at Indy in 1932 and 1933, thanks to photographs by Ed Arnaudin taken in 1962.

1962 012s

In 1932 Studebaker built and entered 5 boat tail specials for the Indianapolis 500.

Unlike most cars entered at Indianapolis at the time 85% of the mechanical parts used in these vehicles were stock items.

Indianapolis chassis specialist Hermann Rigling built the frames and bodies to accommodate the 200 hp 5.5 litre 336 cui straight 8 engines which were sourced from the Studebaker President along with most of the rest of the running gear. The finished cars were said to be capable of 140 mph.

The #22 above was entered for Cliff Bergere and riding mechanic Vern Lake who qualified 10th and finished 3rd in the highest ranking Studebaker at the end of the race.

Cliff from Toledo Ohio first ran at Indianapolis in 1927, this was his best finish which he equalled in 1939. By the end of his career in 1947 Cliff had competed in a then record 16 starts having led 25 laps of a record, at the time, 2,426 laps of racing at the Brickyard.

Cliff is remembered for having completed the 1941 race without a pit stop although he was overcome by fumes after taking the lead and dropped to 5th at the finish line.

He was due to drive a highly rated Novi in 1948, but an ill advised fuel tank enlargement rendered the car unsafe in his opinion, this was in part substantiated after he quit the team.

The popular and ultimately unfortunate Ralph Hepburn took the Novi over he ran at close to record speeds before fatally loosing control and hitting the wall.

In 1940 Bergere helped the 57 year old ‘Racing Mayor’ Ab Jenkins set a 24 hour average speed of 161 mph in the fearsome Mormon Meteor III powered by a 750 horsepower 12 cylinder Curtis aircraft engine at Bonneville.

1962 013s

After the modest 3rd place success in 1932 Studebaker returned to Indianapolis in 1933 with some improved cars.

For 1933 the factory supported cars again with a combination of Rigling chassis and and 336 cui straight 8 President motors appeared with more streamlined body work than in 1932.

The the Studebaker post race advertising and studebakerracing.com shows Studebaker entered a five car team.

The #34 shown here was driven by Tony Gulotta finished 7th highest place amongst the 5 cars with 336 cui President engines and one place behind a smaller 250 cui Studebaker Commander powered Rigling Chassis known as the Art Rose Special driven by Dave Evans.

Tony Gulotta from New Orleans finished a career high 8th in the 1927 American Championship Car Racing National Championship aboard a Miller.

Thereafter Tony focused his efforts primarily on the ‘Indy 500’ coming within 18 laps of winning the race in 1928 driving a Stutz Blackhawk Special Miller when a clogged fuel line sent him to the pits resulting in a 10th place finish. Tony’s best finish at Indianapolis from 13 starts remained his 3rd place finish in 1927.

My thanks to Steve Arnaudin for sending me the scans of his Dad’s slides and to E.B. of The Nostalgia Forum for identifying both vehicles.

Hope you have enjoyed today’s 85% stock special edition of ‘Getting a lil’ psycho on tyres and that you will join me again tomorrow for Ferrari Friday. Don’t forget to come back now !

Share

Millionaire Mystery – Scuderia Parravano Pt 2 of 2

Last Ferrari Friday we got a glimpse of a few of Scuderia Parravano’s fabulous Ferrari’s financed by building millionaire Tony Parravano.

Carlyle Blackwell, Ferrari 750 Monza

Photo Carlyle Blackwell, Publised Courtesy Blackwell Archive, for sales enquiry’s please e-mail infoATpsychoontyres.co.uk and your contact details will be forwarded to the Blackwell Archive.

This week we are looking at Parravano’s 750 Monza chassis number #0538 being driven by an as yet

Carlyle Blackwell, Ferrari 750 Monza

Photo Carlyle Blackwell, Publised Courtesy Blackwell Archive, for sales enquiry’s please e-mail infoATpsychoontyres.co.uk and your contact details will be forwarded to the Blackwell Archive.

unidentified driver in a studio shot by Carlyle Blackwell.

The 750 Monza took it’s name from the track on which Mike Hawthorn and Umberto Maglioli took a debut victory in 1954, powered by a 250 hp 3 litre / 183 cui version of the four cylinder engine that was also used in the 500 TRC in the 1954 season. The 750 Monza allowed Ferrari to retain the World Sports Car Championship in 1954 but was not strong enough against the onslaught of the Mercedes Benz 300 SLR’s to give Ferrari a third consecutive championship.

Tony Parravano is rumoured to have paid Scaglieti over the odds for the unique body work on this particular vehicle which has a narrower radiator intake and a pronounced hump over the engine compared to a standard 750 Monza.

This unique car was crashed by one of the Caroll Shelby / Gino Munaron crew in the 1955 Targa Florio and does not appear to have been driven to any victories though Richie Ginther took 2nd place at New Smyrna Beach in 1957.

In December 1956 this photograph appeared on the cover of Road & Track magazine with the caption on the inside cover that reads “The closest photographer Carlyle Blackwell could come to a red sleigh for St Nick is this 3.5 litre Ferrari. The scene is a quiet village at Christmas Eve (on the 20th Century Fox’s back lot), but if the kiddies are still awake, it’s not the sound of sleigh bells they’ll be hearing as midnight strikes.”

Ed Arnaudin who purchased a copy of this photograph recently told his son Steve that there were rumours in the 1950’s about Tony Parravano having connections to ‘the mob’ which never gained a foothold in Southern California where Tony lived and worked, these rumours are also present on the internet today. There is however no doubt that Tony might have legitimately made a lot of money from the post WW2 housing boom in California.

In mid 1957 Tony Parravano and an associate were charged with tax evasion by the Inland Revenue Service (IRS) and Tony went on the run attempting to take some of his 11 Ferrari’s and 13 Maserati’s with him. Some of these vehicles were seized in the US, others were sold in Mexico. All have since been accounted for.

#0538 M pictured here only made it as far as a Save On supermarket parking lot in Van Nuys, California where it was auctioned off by the IRS for $3500 to Sydney Coolidge along with a $275 trailer in 1958. The car is known to have been used in competition until at least 1963.

Tony Parravano disappeared for good in April 1960 three days before he was due to appear in court. In January 1964 Tony’s associate paid 5 x $100 dollars in fines for 5 counts on a 27 count indictment and walked away a free man while Tony’s wife settled with the IRS and ended up with most of Tony’s assets.

There is no official record of what became of Tony, who, if he were alive today, would be a still credible 94 years old. He is reported to have been seen in a Rome launderette by a US racing journalist and there are reports on the net that the US Attorney General had a “Parravano Room” full of evidence against Tony though the fact remains his single indictment was on tax evasion charges and his associate had to pay $500 in fines on similar charges.

In 1986 #0538M resurfaced completely unrestored fitted with a Chevrolet V8 in the hands of a Mr Bill Shaker in Leesburg, VA who neither knew of the vehicles identity or it’s value. In 1987 the vehicle acquired a new war wound the day before the Ferrari Club of America National meeting when it went on an unmanned trip down a drive way and hit Mr Shakers daily driver a Volvo.

David Smith #0538’s next owner managed to reunite it with it’s original motor and in 1993 #0538 won the Pebble Beach Concours d’Elegance, Richard J Fraser tells his part in the story very well on the Barchetta website here.

If anyone recognises the driver of the car in the photo please chime in below.

My thanks to Ed Arnaudin who purchased a copy of it and to his son Steve who forwarded a scan of the copy to me, my thanks also to all the contributors on various threads at Ferrari Chat and The Nostalgia Forum who have knowingly and unknowingly contributed to today’s blog.

Hope you have enjoyed today’s fugitive edition of ‘Gettin’ a lil’ psyco on tyres’ and that you’ll join me again tomorrow for a look at a Sebring Sprite. Don’t forget to come back now !

28 07 12 PS Many thanks to Pamela Blackwell who has kindly retrospectively given me permission to post the photo’s her father took.

Share

30% More Power – Bristol 411

The first blog I did on a Series 3 411 has been lost in the mists of Rowdy but a couple of photo’s remain.

Today’s model is a first series Bristol 411 built from 1969 to 1971 the first Bristol model to feature a big block B series 335 hp 6,277 cc / 383 cui motor with 30 % more horsepower than the previous model that gave this car a 140 + mph capability.

The original series 411 models featured slightly enlarged windscreens than the 410 an almost imperceptible difference that can be seen in this photo of a 411 in the foreground and 410 to the left of the photograph.

Sir George White one of the three Directors in Bristol Cars in 1969 suffered serious head injuries in a road accident in September 1969 so it was left to his partner Tony Crook to take over the reins at Bristol in Sir George’s absence a process that ended with Tony buying his partner out in 1973.

To help feed all that power to the road the rear axle was fitted with a limited slip differential (LSD) that allows some difference in angular velocity of the output shafts as long as there is some traction available on at least one of the wheels.

With thanks to the PistonHead who kindly brought this car to the recent Sunday Service at the BMW Plant at Cowley and to Cristopher Balfour who’s book ‘Bristol Cars a very British story‘ provided many of the insights in today’s blog.

Hope you have enjoyed today’s TV detective edition of ‘Gettin’ a lil’ psycho on tyres’ and that you will join me again tomorrow. Don’t forget to come back now !

Share

Going it alone – Bristol 407

Just 88 Bristol 407’s were built between 1961 and 1963.

The 407 was the first Bristol model launched after ownership of the Bristol Car Company had been taken over by the Bristol Aeroplane Company founders grandson Sir George White 3rd Bt in partnership with Bristol’s preeminent retailer Tony Crook in September 1960.

The exterior of the Bristol 407 is distinguished from its predecessor the 406, which I have yet to write a blog about, by a horizontal bar across the radiator grill at the front and twin exhaust pipes at the rear.

Underneath the car could not be more different, the 407 is powered by a Canadian built 5130 cc / 313 cui Chrysler V8 connected to a push button operated Torqueflight transmission, a combination which first came to the attention of of Sir Reginald Verdon Smith the Bristol Aeroplane Company director in the 1950’s on a private visit to Canada.

Bristol attempted to develop it’s own aluminium block V8 in the 1950’s but, insufficient experience casting aluminium and lack of capital thanks to the spiralling cost of aircraft development elsewhere in the Bristol group of companies meant that the V8 never got beyond an underdeveloped prototype stage at which crankshaft main bearing housing distortion presented an obstacle to production.

Changing to the Canadian V8 from the hitherto BMW inspired straight 6 necessitated replacing the former transverse leaf front suspension with a pair of coil springs and replacing the highly praised rack and pinion steering with Marles worm driven steering.

The chassis was fitted with Dunlop disc brakes all round and the aluminium body production was moved from Jones Brothers to Park Royal Vehicles in London.

The 407 chassis set out the basic architectural features for all Bristol’s with many incremental modifications right through to the introduction of the Bristol Fighter in 2004.

This particular model photographed at a Loton Park VSCC meeting is registered in Sweden, notice that it is a Right Hand Drive model, Sweden switched to Left Hand Drive in September 1967 to bring it into line with it’s Scandinavian neighbours.

My thanks to Christopher Balfour who’s book ‘Bristol Cars a very British story‘ provided many of the insights in today’s blog.

Hope you have enjoyed today’s Marles worm driven steering edition of ‘Getting a lil’ psycho on tyres and that you’ll join me again tomorrow for a look at the even rarer Bristol 410. Don’t forget to come back now !

Share