Tag Archives: Bostrom

Last Finest And Most Exciting – Bristol Fighter

When I got up at some absolutely ungodly, dark and cold, hour last November to join some friends from the Bristol Pegasus Motor Club for a trip to the Classic Motor Show at the NEC in Birmingham the last thing I could have imagined was finding my self sitting at the wheel of a 210 mph car, the last Bristol ever built to boot, taking a selfie, a couple of hours later thanks to the generosity of owner Mr Gibbs that is exactly what happened.

Bristol Fighter, Classic Motor Show, NEC Birmingham

The Bristol Fighter was designed by Max Bostrom, regular GALPOT readers might remember another vehicle from his design portfolio the rumbling Aston Martin AMR 1 Group C Le Mans challenger. The design of the Fighter seems to center on it’s motor which is based on the 8 litre / 487 cui all aluminium Chrysler V10 as used in the Dodge Viper and Dodge Ram SRT-10 pick up.

Bristol Fighter, Classic Motor Show, NEC Birmingham

Fitted with Bristol’s own heads the motor was made available with 525 hp in normally aspirated base form, a 628 hp option was also available which with the effects of ram air when in motion is boosted to 660 hp, and if that was not was not enough in turbocharged from the motor produced 1012 hp to become the second most powerful motor ever offered by a manufacturer second only to the 1046 hp quoted for the SSC Aero.

Bristol Fighter, Classic Motor Show, NEC Birmingham

The standard transmission is a six speed manual and with all the torque from the V10, when Richard Porter tested one for evo magazine in in 2008 he found the motor would pull in sixth gear from as low as 30 mph. A 4 speed automatic was an option with performance being the same regardless of transmission meaning 60 mph could be reached from rest in a claimed 4 seconds with the 525 hp motor.

Bristol Fighter, Classic Motor Show, NEC Birmingham

Despite extensive use of aluminium and carbon fiber to save weight and keep the center of gravity than almost every weekend apart from a Ferrari Enzo the interior is completely civilised and decked with finest Wilton carpet over extra thick soundproofing underlays to provide a “perfect environment in which to enjoy the car’s astonishing performance.

Bristol Fighter, Classic Motor Show, NEC Birmingham

At 6′ tall I find many performance vehicles no go area’s, however the Bristol is different it was designed to accommodate individuals between 5′ and 6′ 7″. I can just picture my 5′ 2″ mother loving this car since she recently passed her Institute of Advanced Motorists test. Notice the swicth gear, finest military grade good enough to last the life of the car, just as well since a replacement switch would cost you £60 each in 2008.

Bristol Fighter, Classic Motor Show, NEC Birmingham

With all of that glass parking should be a piece of cake, no having to open the gull wing doors and getting a mate to talk you in as would be mandatory with some of Marchello Gandini or Pininfarina’s finest designs.

Bristol Fighter, Classic Motor Show, NEC Birmingham

As Bristol said “in a world where cars are styled first and tested for function afterwards the Fighter is again unique”. The 0.28 drag coefficient of the body is class leading, in part because this 210 mph car has no need of wings, Gurney flaps or even venturi because it was designed to set new aerodynamic standards not follow the crowd.

Bristol Fighter, Classic Motor Show, NEC Birmingham

Exact production numbers for the Fighter are hard to come by one source says sixteen Fighters were built while another suggests at least 46 may have been built. What is for sure is that today’s featured car was the last completed Bristol to leave the factory, the owner Mr Gibbs also tells me that one incomplete Fighter left the factory when it closed down in 2011.

In the advertising cody for the Fighter model Bristol claim that it is “Designed according according to engineering and aerodynamic principles, it is intended to represent the finest and most exciting way for two people to travel by road.” One day I’d like to put that to the test, meantime I’d like to thank Mr Gibbs for letting me try his Fighter, the very last complete Bristol to leave the factory, for size.

Now all I have to do is see if I can save my pennies fast than any one else before Mr Gibbs parts with it, did I mention this car which has never been registered is for sale ? It was and if you would like to purchase it get in touch and I’ll gladly pass the message on.

Thanks for joining me on this “Last Finest And Most Exciting” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. When I’ll be looking at a agricultural super vehicle. Don’t forget to come back now !

Share

Wall Of Noise – Aston Martin AMR 1 #01 & #03

In 1989 Group C sports car racing reached new heights popularity among manufacturers when Aston Martin joined in the fun as a manufacturer. Aston Martin Tickford had supplied motors for the Nimrod Group C cars that were run from 1982 until 1984. They also supplied the even less successful EMKA Productions and Cheetah teams which ran sporadically from 1983 to 1985.

Aston Martin AMR1, Le Mans

The seeds of the 1989 program were laid after an agreement between Aston’s owners Victor Gauntlet and Peter Livanos that Aston Martin should go the whole hog and manufacture a Le Mans challenger wholly in house. A month after they announced their plans Ford took a controlling interest in Aston Martin and to the surprise of Gauntlet and Livanous agreed the racing program should continue on condition that it did not interfere with Aston’s production vehicles and that it would require no finance from Ford recommending a separate company should be set up to run the racing operation.

Aston Martin AMR1, Le Mans

Aston Martin and Ray Mallock, using the Ecurie Eccose name with whom he had won the junior Group C2 championship in 1986 created a new company called Proteus Technology Ltd known as Protech. Protech was to be funded for six years to the tune of £26 million by the Livanos family. Callaway Engineering was engaged to develop the 5.3 litre Aston Martin Virage V8 motor into first a 600 hp 6 litre / 366 cui motor and later a 700 hp 6.3 litre unit.

Aston Martin AMR1, Le Mans

The team hoped to have the first cars, designed by Max Bostrom, racing towards the end of 1988 and when the deadline passed they prepared themselves for a start at the first Group C race of 1989. An accident during testing meant the team were without a car to take to the first race of 1989 and so attracted a US$ 250,000 fine for missing the race.

Aston Martin AMR1, Le Mans

The AMR1’s first appearance was at Dijon where AMR1/01 driven by David Leslie and Brian Redman finished a distant 17th. At Le Mans which was a non championship event two cars were entered the #18 AMR1/01 for Redman, Micheal Roe and Costas Los while the #19 AMR/03 was driven by Leslie, Ray Mallock and David Sears.

Aston Martin (Callaway) RDP87, Le Mans

Despite circulating in a wall of noise equal to anything heard in the NASCAR Sprint Cup the AMR1’s were short on horsepower and overweight the #18 qualified 32nd while the #19 could only qualify 40th. The #19, seen at Arnage below, eventually retired with electrical issues early on the Sunday morning of the race while the #18 soldiered round to an 11th place finish.

Aston Martin AMR1, Le Mans

In the next race, at Brands Hatch, Redman and Leslie scored the teams best result a 4th place finish. Aston Martin finished the season 6th behind Mercedes-Benz, two private Porsche teams, Jaguar and Nissan but ahead of the factory Toyota team.

During the course of 1989 Bernie Ecclestone convinced the FIA that the future of Sports Car racing lay with 3.5 litre engine rules as required in Formula One from 1991. Aston Martin had no choice but to withdraw at the end of 1989 as they had no suitable engine and Ford had given the nod to Jaguar to use it’s own Ford Cosowrth HB V8 Formula One engine, and running the unfinished Aston Martin AMR2 for a year made no sense.

My thanks to fausto at The Nostalgia Forum for finding the link to the AMR2 wind tunnel models.

Thanks for joining me on this “Wall Of Noise edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. Don’t forget to come back now !

Share