Tag Archives: Viper

Bookended With Class Wins – Dodge Viper GTS-R #C7

Like the Forent Moulin’s Dodge Viper GTS-R #C30 I looked at last year today’s featured Chrysler example chassis #C7 was originally built for the French Oreca entrant.

Chrysler Viper GTS-R, Oliver Bouquet, Silverstone Classic,

In 1997 the Viper Oreca team entered the car in 10 events with Philippe Gache and Olivier Beretta as #C7’s principle drivers who achieved a season high 10th place overall, 1st In GT2, on the cars debut at the Hockenheimring in April.

Chrysler Viper GTS-R, Oliver Bouquet, Silverstone Classic,

For the 1997 Le Mans Prequalifying weekend the following month later Phillipe and Oliver were joined in the #61 Oreca entry by Soheil Ayari and between them they were classified 44th.

Chrysler Viper GTS-R, Oliver Bouquet, Silverstone Classic,

For the 24 Hour race at Le Mans in June 1997 Soheil was moved over to the #62 Oreca entry replaced in the #61 Oreca entry by Dominique Dupuy. #C7 started from 34th on the grid with a 37th fastest qualifying time of 4m 4.654s, but retired after an accident on it’s 264th lap.

Chrysler Viper GTS-R, Oliver Bouquet, Silverstone Classic,

#C7’s final two appearances were at Le Mans in 1998, Dominique Dupuy was joined in the car now renumbered #53 by Justin Bell for the Prequalifying Weekend during which they were classified 36th.

For the 1998 Le Mans 24 Hour race a month later Dominique was taken out of the car after the preliminary qualifying session and replaced by Luca Drudi and David Donohue who with Justin started 33rd on the grid with a time of 4m 05.648s.

They finished the race 11th overall and bookended the cars career with another GT2 class win.

The car is seen in these photographs taken at last years Silverstone Classic with Oliver Bouquet at the wheel.

Thanks for joining me on this “Bookended With Class Wins” edition of “Gettin’ a li’l psychoontyres” I hope you will join me again tomorrow. Don’t forget to come back now !

Share

PVO Sports Utility – Dodge RAM SRT 10

For the 1996 Chicago Auto Show Dodge produced a Dodge RAM VTS concept sport utility truck powered by a 8 litre / 488 cui V10 motor form their revised Phase II Viper sports car.

Dodge RAM SRT 10, Kernow Mill,

The VTS never went into production but 8 years later DaimlerChrysler’s Performance Vehicle Operations PVO produced the RAM SRT 10 now powered by an 8.3 litre / 505 cui V10 producing 500 hp like the one seen in these photographs taken at Kernow Mill during the summer.

Dodge RAM SRT 10, Kernow Mill,

The 5,130 lb (2,330 kg) regular cab RAM SRT 10 will reach 60 mph in just 4.9 seconds, cover a 1/4 mile in 13.6 seconds to reach 106 mph and has a top speed of 154 mph. Until the arrival of the Australian HSV Maloo R8 the RAM SRT 10 was the quickest production pick up in the world after NASCAR driver Brendam Gaughan set a record of 154 mph in February 2004.

Dodge RAM SRT 10, Kernow Mill,

Production of the RAM SRT 10 ran from November 2004 to the end of the 2006 model year during which time 9,527 examples were built.

Thanks for joining me on this “PVO Sports Utility” edition of “Gettin’ a li’l psycho on tyres”, I hope you’ll join me again for Ferrari Friday tomorrow. Don’t forget to come back now !

Share

Brand Presence – Dodge Viper GTS-R #C30

In order to promote it’s new for 1995 Dodge Viper GTS Coupé and compete in the plethora of GT Championships across the globe in the late 1990’s Chrysler sanctioned the construction of GTS-R race variant to be overseen and maintained by the French Race and Engineering team Oreca.

Chrysler Viper GTS-R, Florent Moulin, GT Legends, Silverstone Classic,

The bare chassis for the Oreca built GTS-R’s were fabricated by the British company Reynard who had a long established reputation for building open wheelers from Formula Ford all the way up to Indycars. There reputation was enhanced by the fact that every time they entered a new formula they won first time out.

Chrysler Viper GTS-R, Florent Moulin, GT Legends, Silverstone Classic,

The 8 litre / 488 cui V10 motors were lightly modified to improve output and reliability, in all 5 prototypes and a further 52 Chrylser Viper GTS-R’s were built between 1996 and 2005.

Chrysler Viper GTS-R, Florent Moulin, GT Legends, Silverstone Classic,

In the USA the cars were run as Dodge Vipers while in Europe where the Dodge brand did not have any official market presence the cars were run as Chrysler Vipers, with the exception being at the 2007 Nurburgring 24 Hour race where ’99,’01 and ’02 winners Zakspeed entered their Viper, which finished second, as a Dodge to mark the arrival of the Dodge brand in Europe.

Chrysler Viper GTS-R, Florent Moulin, GT Legends, Silverstone Classic,

Today’s featured car chassis #C30, seen at Silverstone in the hands of Classic car dealer Florent Moulin, appears to have been built in for the 2000 season and raced by Viper Team Oreca in the US, as a Dodge and Europe, as a Chrysler, by Jean-Philippe Belloc, Anthony Beltoise, Ni Amorim, Tommy Archer, David Donohue, Marc Duez, Patrick Huisman and Boris Derichebourg.

#C30’s best result was in the 2000 Grand Prix of Sanoma where Tommy Archer and David Donohue recorded a class win and 8th overall in the Dodge branded racer.

Share

Last Finest And Most Exciting – Bristol Fighter

When I got up at some absolutely ungodly, dark and cold, hour last November to join some friends from the Bristol Pegasus Motor Club for a trip to the Classic Motor Show at the NEC in Birmingham the last thing I could have imagined was finding my self sitting at the wheel of a 210 mph car, the last Bristol ever built to boot, taking a selfie, a couple of hours later thanks to the generosity of owner Mr Gibbs that is exactly what happened.

Bristol Fighter, Classic Motor Show, NEC Birmingham

The Bristol Fighter was designed by Max Bostrom, regular GALPOT readers might remember another vehicle from his design portfolio the rumbling Aston Martin AMR 1 Group C Le Mans challenger. The design of the Fighter seems to center on it’s motor which is based on the 8 litre / 487 cui all aluminium Chrysler V10 as used in the Dodge Viper and Dodge Ram SRT-10 pick up.

Bristol Fighter, Classic Motor Show, NEC Birmingham

Fitted with Bristol’s own heads the motor was made available with 525 hp in normally aspirated base form, a 628 hp option was also available which with the effects of ram air when in motion is boosted to 660 hp, and if that was not was not enough in turbocharged from the motor produced 1012 hp to become the second most powerful motor ever offered by a manufacturer second only to the 1046 hp quoted for the SSC Aero.

Bristol Fighter, Classic Motor Show, NEC Birmingham

The standard transmission is a six speed manual and with all the torque from the V10, when Richard Porter tested one for evo magazine in in 2008 he found the motor would pull in sixth gear from as low as 30 mph. A 4 speed automatic was an option with performance being the same regardless of transmission meaning 60 mph could be reached from rest in a claimed 4 seconds with the 525 hp motor.

Bristol Fighter, Classic Motor Show, NEC Birmingham

Despite extensive use of aluminium and carbon fiber to save weight and keep the center of gravity than almost every weekend apart from a Ferrari Enzo the interior is completely civilised and decked with finest Wilton carpet over extra thick soundproofing underlays to provide a “perfect environment in which to enjoy the car’s astonishing performance.

Bristol Fighter, Classic Motor Show, NEC Birmingham

At 6′ tall I find many performance vehicles no go area’s, however the Bristol is different it was designed to accommodate individuals between 5′ and 6′ 7″. I can just picture my 5′ 2″ mother loving this car since she recently passed her Institute of Advanced Motorists test. Notice the swicth gear, finest military grade good enough to last the life of the car, just as well since a replacement switch would cost you £60 each in 2008.

Bristol Fighter, Classic Motor Show, NEC Birmingham

With all of that glass parking should be a piece of cake, no having to open the gull wing doors and getting a mate to talk you in as would be mandatory with some of Marchello Gandini or Pininfarina’s finest designs.

Bristol Fighter, Classic Motor Show, NEC Birmingham

As Bristol said “in a world where cars are styled first and tested for function afterwards the Fighter is again unique”. The 0.28 drag coefficient of the body is class leading, in part because this 210 mph car has no need of wings, Gurney flaps or even venturi because it was designed to set new aerodynamic standards not follow the crowd.

Bristol Fighter, Classic Motor Show, NEC Birmingham

Exact production numbers for the Fighter are hard to come by one source says sixteen Fighters were built while another suggests at least 46 may have been built. What is for sure is that today’s featured car was the last completed Bristol to leave the factory, the owner Mr Gibbs also tells me that one incomplete Fighter left the factory when it closed down in 2011.

In the advertising cody for the Fighter model Bristol claim that it is “Designed according according to engineering and aerodynamic principles, it is intended to represent the finest and most exciting way for two people to travel by road.” One day I’d like to put that to the test, meantime I’d like to thank Mr Gibbs for letting me try his Fighter, the very last complete Bristol to leave the factory, for size.

Now all I have to do is see if I can save my pennies fast than any one else before Mr Gibbs parts with it, did I mention this car which has never been registered is for sale ? It was and if you would like to purchase it get in touch and I’ll gladly pass the message on.

Thanks for joining me on this “Last Finest And Most Exciting” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow. When I’ll be looking at a agricultural super vehicle. Don’t forget to come back now !

Share

Lighter Stiffer Faster – Chrysler Viper Phase II RT/10

The Dodge Viper was conceived as a modern Cobra by Chrysler’s Advanced Design Studios in 1988 and realised by 85 “Team Viper” engineers hand picked by Chief Engineer Roy Sjoberg ready the first deliveries in 1992.

Dodge Viper RT/10, Summer Classics, Easter Compton

The brutal aesthetics are matched by a few agricultural underpinnings including a pushrod operated 2 valve per cylinder motor originally designed for the Dodge Dakota Pick up as were the tie rod ends and parts of the front wheel hubs.

Dodge Viper RT/10, Summer Classics, Easter Compton

For 1996 the RT/10, like the model seen here at Summer Classics Easter Compton, was revised which resulted in a lighter car with a stiffer chassis and more powerful motor.

Dodge Viper RT/10, Summer Classics, Easter Compton

Viper engine blocks aluminium cast versions of the cast iron Dodge Dakota blocks, with the castings originally being done by Lamborghini a Chrysler subsidiary at the time. In Phase II RT/10 form seen here the V10 produced 415 hp from its 7,998 cc / 488 cui.

Dodge Viper RT/10, Summer Classics, Easter Compton

The RT/10 is intended to be a garaged vehicle originally these cars are supplied with a roof, side screens and instructional video on how it all fitted together.

Dodge Viper RT/10, Summer Classics, Easter Compton

Vipers exported to Europe like the example seen here are sold under the Chrysler brand, but do not appear to differ in any other way than their Dodge branded siblings for the US domestic market.

Dodge Viper RT/10, Summer Classics, Easter Compton

Capable of reaching a 119 mph in a quarter mile run and with a top speed of over 180 mph the Viper’s only week spot has been it’s brakes even after ABS became available in 2001.

Second generation Phase II Vipers were replaced by the third generation ZB series in 2003.

Thanks for joining me on this “Lighter Stiffer Faster” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me for Ferrari Friday tomorrow. Don’t forget to come back now !

Share