Tag Archives: TorqueFlite

Simulated Walnut Grain – Chrysler Town & Country

Twenty five years after the original Chrysler Town & Country Barrel Back Estate / Wagon was first seen the forth post war generation Town & Country Estate / Wagon was launched in 1965.

Chrysler Town & Country, Avenue Drivers Club, Queen Square, Bristol,

Elwood Engel was responsible for the design which featured a unitary body with a 121 inch wheelbase.

Chrysler Town & Country, Avenue Drivers Club, Queen Square, Bristol,

The 220 inch body of the fourth generation Town & Country used a combination of torsion bar front suspension and leaf sprung rear suspension and was initially available with either a 270 hp or high compression 305 hp motor, the latter requiring premium fuel.

Chrysler Town & Country, Avenue Drivers Club, Queen Square, Bristol,

Push button activated automatic transmission was deleted in favour of a near ubiquitous PRNDL selector that could be either floor or steering column mounted for the standard Torqueflite automatic transmission.

Chrysler Town & Country, Avenue Drivers Club, Queen Square, Bristol,

Despite the Chrysler Imperial Crown having standard disc brakes since 1950, they were still optional on the fourth generation Town & Country.

Chrysler Town & Country, Avenue Drivers Club, Queen Square, Bristol,

By 1968 the lower powered Town Country produced 290 hp from it’s two barrel carburetor 383 cui V8.

Chrysler Town & Country, Avenue Drivers Club, Queen Square, Bristol,

’68 model Town & Country models, the last of the fourth generation, are also distinguished by their mandatory side running lights and the introduction of simulated wood panels, reprising the genuine wood panels last seen on the Town & Country models in 1950.

Chrysler Town & Country, Avenue Drivers Club, Queen Square, Bristol,

Today’s featured ’68 Town & Country was first registered in the UK on 17th September 2012.

Chrysler Town & Country, Avenue Drivers Club, Queen Square, Bristol,

The car seen at an Avenue Drivers Club meeting in Bristol earlier this year is shown as running a 7.2 litre / 440 cui motor of a type not seen until 1971 on the fifth generation post war Town & Country.

Thanks for joining me on this “Simulated Walnut Grain” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again for a Festive Ferrari Friday. Wishing all GALPOT readers a Merry Christmas, don’t forget to come back now !

Share

Shortened, Channeled and Tubbed – Studebaker Champ

This month I’m taking a break from Maserati Monday’s to return to a short run of pick up Monday’s featuring some interesting highly modified pick up’s.

A couple of weeks ago Johnny “Wicked in Suede” Martinez posted today’s first photo taken by his wife Linda, of himself and his friend Barry Buchanan standing next to Barry’s ’62 Studebaker Champ Pro Street Rod, my first excited reaction was to find out more about it and to see if I could get some more photo’s for today’s blog.

Studebaker, Champ, California,

The Studebaker Champ was a pickup built between 1960 and 1964 with a cab based on the Lark compact and is probably most notable for having a novel, for the time, sliding window at the back of the cab.

Studebaker, Champ, Dodge 383, California,

Early champs had a choice of motors including; a 170 cui flathead 6 the design of which dated back to 1939, 259 cui V8 or 289 V8, sitting in front of the recessed firewall of Barry’s ’62 Champ is a ’67 Dodge Coronet big block 383 good for an easy 335hp in unmodified form when it was manufactured.

Studebaker, Champ, California,

Modifications to this Champ include lowering the body on the chassis by 4″ a process known as “channeling”, it has also been “tubbed” meaning that large interior wheel arches have been welded in to accommodate the 295/50/15 rear BF Goodrich tyres which are fitted to American Racing 5 spoke rims.

Studebaker, Champ, California,

The Coronet 383 is fitted a an A727 transmission which I believe is better known as Chrysler TorqueFlite the original push button variations of which were first seen in 1956, the custom interior easily accommodates Barry’s 6′ 4″ frame.

Studebaker, Champ, California,

Barry has shortened the pick up bed, which houses the 12 gallon fuel tank, by 18 inches, mounted on the back of the bed is a spoiler sourced from a Pontiac Fiero .

Studebaker, Champ, California,

The rear axle is a Ford 9″ which would orginally have been used in; Fairlane, Mustang, Falcon, Torino, F100 and F150 applications.

Studebaker, Champ, California,

Linked here is a youtube clip of Barry talking about his Champ and some wonderful footage of him driving it on a California cruise.

My thanks to Barry and his girlfriend Kathy Junge who also worked on the Champ and took all but the first of today’s photographs.

Thanks for joining me on this “Shortened, Channeled and Tubbed” edition of “Gettin’ a li’l psycho on tyres” I hope you will join me again tomorrow when I’ll be looking at a vehicle with an aero engine that had a reputation for catching fire when in operation. Don’t forget to come back now !

Share